SAFETY FEATURES

• High Temperature safety cut off

• Low water level boiler cut off.

• Electrical overload cutoff relay for compressor

• Time delay for compressor switch ON

• Electrical circuit breaker

PRE INSTALLATION MANDATORY REQUIREMENT

(Guarantee void in case of non compliance)

• Distilled water or DM water continuous supply with tap for boiler input of % "BSP at 3 feet height.

• Room temperature around machine preferably at 25°C with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30°C.

• Stabilized input voltage of 230V A.C Amps. Use of servo controlled stabilizer is recommended.

• Water Drain line with 1/2" nozzle to be provided at floor level.

OPTIONAL ACCESSORIES

• Micro PLC Based Control & Recording system for Reach in stability testing chamber with in – built Recording, PC Interface with 21 CFR So ware, DOT - Matrix Printer Interface.

• R.H. Imported Sensor for 100 % RH Readings.

• Standby Refrigeration Systems as per capacity.

• PLC for auto change over for standby refrigeration.

• CFR 21 part 11 compliance software for PLC with Rs. 485 or Ethernet Communication.

• Data Logger for Rs. 485 communication system with PC Connectivity.

• 4, 8 and 12 channel Data Scanner complete with sensor RH and PT-100 Sensor.

• SMS Mobile alert system.

• Door Access Security system.

• Safety Digital Temperature Controller

• Timer

• Recommended Stabilizer.